Extended Instrument Gear wrench Storage Case

I.Product Introduction

II. Core Selling Points

1. 1.54 meters long internal warehouse, super long piece of long strip equipment complete tile storageInternal net length 1543mm, all kinds of long gear wrench, ultra-long surveying probe, lengthened photographic slide, long rod fishing gear do not need to be split directly flat; the upper and lower stratified space partitions to receive wires, consumables, small accessories, the complete set of heavy equipment unified storage, sufficient loading capacity.
2. Military thickening integrated injection molding hull, heavy-duty construction site anti-fall does not deformThe overall thickened polypropylene high-pressure injection molding, the top surface of the box, the side wall, the bottom is covered with multiple layers of cross-three-dimensional reinforcement reinforcement, four-angle integrated high-impact protective block; multi-layer heavy stacking, high-altitude drop, construction site hard material impact is not easy to recess, cracking, deformation, load-bearing protection performance far beyond ordinary storage box, thin aluminum box.
3. Cover surround rubber seal design, all-weather waterproof and dustproofThe inside of the lid is equipped with a whole continuous rubber seal, the edge of the box behind the cover is tightly pressed, the field, multi-dust workshop, wet waterside environment, rainwater, sediment, fog can not penetrate into the warehouse, to prevent the instrument circuit short circuit, metal hardware rust corrosion.
4. Built-in waterproof air pressure balancing valve, cross-altitude aviation consignment unblockedThe hidden waterproof pressure relief valve on the side of the box, the automatic balance of the air pressure inside and outside the box, the air cargo, high and low field operations, high and low temperature difference environment will not appear negative pressure suction tight box cover, off-site engineering, out of the box smooth and effortless.
5. Wide temperature weathering and anti-aging material, four seasons outdoor long-term stability and durabilityModified PP raw materials add anti-UV, hardy modified additives, -30 °C ~ +80 °C high and low temperature environment is not brittle, not deformation, northern winter wild, southern exposure site long-term use is not easy to age crack.

III. Specification Table

IV. Details Display

1. Full-body multi-layer cross-dimensional thickening strengthens the casingThe box up and down, the surrounding integrated molding multi-layer staggered reinforcement reinforcement, the overall rigidity is greatly improved, the multi-layer box stacking, heavy object crushing, landing impact is not easy to deform and damage, the site, the crew year round repeated transfer protection capacity full.
2. Multiple sets of self-locking spring lockingAlong the long side of the box evenly distributed multiple sets of thickened spring locks, open and close simple, buckle automatic spring locking, tight does not loosen; each set of locks reserved padlock hole, installed padlock can lock to keep a complete set of lengthened hardware, large precision detection equipment.
3. Integrated central wide reinforcement handleThe front of the box is integrated injection molding wide hand, wide curved non-slip grip, full load of the whole set of heavy and long tools bearing no deformation, double lift, short-distance movement and comfortable.
4. Long deepens the stratified Datong warehouseDeep and shallow layered large flat warehouse, all kinds of ultra-long gear wrench, long industrial instruments complete tile, wire, small parts placed, the whole set of heavy long strip equipment one-stop storage.

V. Color Selection and Customization Services

VI. Application Scenarios

1. Auto repair extension gear wrench set of storage: many extended sleeves, torque wrench, long maintenance probe complete storage, waterproof shock, garage, field repair with the car;
2. Field mapping ultra-long instrument transfer: ultra-long geological detection equipment, long-distance sampling long gun stratified storage, all-weather sealing box body to adapt to outdoor long-term survey operations;
3. The film and television crew lengthened the slide rails, shooting accessories received: long photographic slides, light long strip accessories in one storage, long-distance external scene shooting anti-squeeze, anti-scraping flowers;
4. Industrial warehouse heavy tools storage and storage: isolation of dust, humid air, to prevent the extension of metal wrench rust, precision detection probe oxidation, extend the service life of the equipment;
5. Outdoor Luya ultra-long fishing gear storage: ultra-short section lengthened rods, a full set of fishing wheel accessories complete flat, sealed moisture, mountain, lake fishing travel protection;
6. Engineering equipment field long-distance consignment: thickened hard injection box with double-layer buffer sponge, trucks, air transport to resist the extrusion of heavy objects, impact, greatly reduce the probability of long tools, large instruments damage.

VII. Material and Process Description

1. Box main material: modified thickened polypropylene PP integrated high-pressure injection molding, impact resistance, waterproof and moisture-proof, high and low temperature, outdoor long-term use is not aging, not brittle, not easy to shape.
2. Sealing strip: high elastic natural rubber material, tens of thousands of times open and close still close to the box body, waterproof and dustproof performance for a long time stable and not attenuated.
3. Hardware accessories: hinge, locking the internal metal shrapnel to do electroplating and rust treatment, long-term wet, multi-dust construction site, lake environment is not easy to rust.
4. Molding process: integrated high-pressure injection molding without splicing gap, strong overall body, there is no splicing seam seepage, cracking hidden dangers, protective performance is better than aluminum alloy splicing box.
5. Lining process: wave sponge integrated hot pressing molding; the underlying hand torn sponge layered independently, can freely adjust the slot layout; custom CNC CNC milling, the card position is precisely fit to lengthen the tool, instrument contour.

VIII. Packaging and Delivery

1. Independent protection packaging: single box carton packaging, the outer layer of corrugated carton independent packaging, express transport to eliminate the angle bump, surface scraping;
2. Delivery time: empty box stock within 48 hours out of the warehouse; LOGO engraving, custom molding EVA, sponge, pearl cotton orders 15 working days of delivery;
3. Logistics solutions: scattered retail express delivery to the door; large-scale collection of special line logistics, support vehicle distribution on-site;
4. Boxing list: the main body of the protective box; optional wave cotton, hand torn sponge sent in the same box.

IX.Frequently Asked Questions