Pull-rod type three-proof in wheels protective case

I.Product Introduction

II. Core Selling Points

1. Puller roller integrated dual-use design, heavy load handling and convenient

   The back of the box hides the multi-stage high telescopic pull rod, the bottom with a wide wear-resistant roller, filled with heavy-duty tools, large instruments can be directly dragged and implemented; the front of the box, the two sides are equipped with auxiliary handle, short-distance single hand, multi-person lift, long-distance drag three ways, field, site transfer greatly reduces the load pressure.

2. Box cover surround rubber sealing structure, all-weather three waterproof and dustproof tide

   The inside of the lid is inlaid with a continuous rubber seal, the edge of the box is tightly pressed on the edge of the box, the field of rain, multi-dust workshop, wet field environment, rain, sediment, fog can not penetrate into the warehouse, to avoid metal tool rust, precision instrument circuit board moisture short circuit.

3. Multiple sets of self-locking spring locking, locking solid support locking anti-theft

   The symmetrical distribution of the box around a number of thickened spring locks, a single hand can be quickly opened and closed, the spring locking force is tight, the car bumps, long-distance logistics consignment will not accidentally pop up; each set of locks reserved standard padlock holes, valuable testing equipment, complete sets of professional tools can be locked and stored more secure.

4. Deepen the stratified large-capacity warehouse, tool instrument zoning regulation and storage

   Deep layered large inner compartment, the lower layer of the deepening space can be flat mainframe, lengthening tools, upper mezzanine wires, probes, small accessories; optional buffer sponge can be free cut slot, equipment, tools independent card fixed, transport without sliding friction scraping body.

5. Wide temperature weathering and anti-aging material, long-term stability and durability of the whole scene four seasons

   Modified PP raw materials add anti-UV, hardy modified additives, -30 °C ~ + 80 °C high and low temperature environment is not brittle, not deformation, the northern winter outdoor, southern exposure site long-term use is not easy to age crack.

III. Specification Table

IV. Details Display

1. Telescopic lever + Reload Roller CombinationHidden multi-station high telescopic rod, suitable for different height drag operation; the bottom widened thick wear-resistant roller, cement site, asphalt road surface, indoor floor to implement smooth and noise-free, full load of heavy tools, instruments are not easy to stutter, damage.

   

2. The three-dimensional thickening cross-strengthening casing
   The box is all-round integrated staggered and strengthened, the overall rigidity is greatly improved, the multi-layer box stacking, heavy object crushing, landing impact is not easy to be deformed and damaged, and the construction site and the crew are repeatedly transferred protection throughout the year.

   

3. Double-sided surround self-locking spring lockingLeft and right symmetrical multiple sets of thick spring locks, simple opening and closing operation, automatic spring locking after buckling, tight is not loosened; each set of locks reserved padlock hole, installed padlock can be locked to keep valuable instruments, complete sets of maintenance hardware.

   

4. Deepening the stratified broad warehouse

   Deep and shallow layering deepens the spacious warehouse, large instruments, complete sets of sleeve tools, tiles, small parts, large-capacity loading, the whole set of field equipment one-stop storage is complete.

   

V. Color Selection and Customization Services

VI. Application Scenarios

1. Complete set of heavy-duty auto repair hardware tools: extended sleeve, torque wrench, industrial detection probe complete storage, waterproof and shockproof, field repair, garage with the car to drag and carry;
2. Medium-sized precision detection instrument field transfer: flaw detector, environmental sampling equipment, ranging instrument layered shock absorption, rod saving, field engineering detection throughout the protection measurement accuracy;
3. Aerial aerial drone full set of equipment storage: UAV fuselage, remote control, multiple sets of batteries, paddle leaves, charger partition storage, outdoor aerial travel waterproof and dustproof;
4. The film and television crew a full set of camera lighting equipment storage: camera, multiple lenses, fill light, battery cable storage, exterior shooting drag portable, anti-squeezing scratch lens body;
5. Exhibition business sample travel: industrial product samples, small demonstration equipment sealed storage, pull rod box travel light, hard box to enhance professional display texture;
6. Warehouse, garage long-term storage and storage: isolation of dust, moist air, prevent metal tools rust, precision instruments oxidize aging, extend the service life of equipment;
7. Express long-distance mail valuable equipment tools: thickened heavy-duty hard injection molding box with double-layer buffer sponge, resisting sorting extrusion, impact, greatly reducing the probability of instrument, complete sets of hardware damage.

VII. Material and Process Description

1. Box main material: modified thick polypropylene PP integrated high-pressure injection molding, impact resistance, waterproof and moisture-proof, high and low temperature, outdoor long-term use is not aging, not brittle, not easy to shape.
2. Sealing strip: high elastic natural rubber material, tens of thousands of times open and close still close to the box body, waterproof and dustproof performance for a long time stable and not attenuated.
3. Hardware accessories: hinge, lock metal shrapnel electroplating anti-rust treatment, wet, multi-dust site environment is not easy to rust and kardon.
4. Molding process: integrated high-pressure injection molding without splicing gap, strong overall body, there is no splicing seam seepage, cracking hidden dangers, protective performance is better than aluminum alloy splicing box.
5. Lining process: wave sponge integrated hot pressing molding; bottom hand torn sponge layered independently, can freely adjust the slot layout; custom CNC CNC milling, card precise fit tools, instrument contours.

VIII. Packaging and Delivery

1. Independent protection packaging: single box carton packaging, the outer layer of corrugated carton independent packaging, express transport to eliminate the angle bump, surface scraping;
2. Delivery time: empty box stock within 48 hours out of the warehouse; LOGO engraving, custom molding EVA, sponge, pearl cotton orders 15 working days of delivery;
3. Logistics solutions: scattered retail express delivery to the door; large-scale collection of special line logistics, support vehicle distribution on-site;
4. Boxing list: the main body of the protective box; optional wave cotton, hand torn sponge sent in the same box.